Share this
Tweet this
Email this

Fluidmatic DCT MV

Part No: N/A
Fluidmatic DCT MV
Fluidmatic DCT MV
Automatic Transmission Fluid
K E Y D ATA
SUITABLE FOR
BMW: DCTF-1, P/N 83 22 2 148 578, 83 22 2 148 579, 83 22 0 440 214, 83 22 2 147 477,
83 22 2 167 666, 83 22 2 446 673
BMW P/C Drivelogic 7-speed
VW G 052 182, G 052 512, G 052 529, G052 536, G 055 529, G 055 536 FCA: FIAT 9.55550-HE2, FIAT 9.55550-MZ6
Chrysler P/C Powershift 6-Speed, P/N 68044345 EA
FORD WSS-M2C-200-D2, WSS-M2C-218-A1, WSS-M2C-936-A Hyundai-Kai: P/N 04300-2N100, P/N 04300-2N110 Mercedes-Benz: MB 236.21, 236.24, 236.25, 239.21
Daimler Trucks: DTFR 13C130
MITSUBISHI MZ320065 Dia-Queen SSTF-I, P/C 6DCT470 PORSCHE P/N 999 917 080 00, P/N 999 917 080 01 PSA 9734.S2, P/C DCS 6-Speed
RENAULT P/C DC0, P/C DC4, P/C DW6 Nissan P/N 999MP-GTRT00P
VOLVO P/N 116 1838, 116 1839 BYD Q/BYD-A1909.0058-2013
Chang'an DCTF Chery DCT EATON PS-278
Ferrari P/C DCT 7-speed GEELY P/C 7 Speed Lynk & Co.01
GWM DCT
T E C H N O L O G Y
L i f e - b o o s t t e c h n o l o g y
Your peace of mind solution.
Life-boost technology will maximize the durability of the components and parts of the driveline equipment of your vehicle.
Our products will offer the best services as your vehicle will require drastically less
maintenance providing reduced Total Cost Ownership (TCO) with on top a
significant extended drain interval. A solution which offers a peace of mind throughout the normal lifetime of your vehicle.
A P P L I C AT I ONS
Fluidmatic DCT MV is a dual clutch transmission fluid based on an advanced synthetic technology which covers 95% of the wet clutch DCT market.
Fluidmatic DCT MV is suitable for service fill in the following vehicles brands:
- German OEM : Volkswagen / BMW / Mercedes / Porsche / Smart
- Asian OEM : Mitsubishi
- European OEM : Renault / Volvo
Fluidmatic DCT MV contains the latest shear stable viscosity modifier technology allowing a very high performance.
P E R F O R M A N C E S & C U S T O M E R B E N E F I T S
Exceptional shear stability: Fluidmatic DCT MV has been formulated to provide very high performance for shear stability, critical for maintaining film thickness enabling robust protection for gears and bearings for the duration of the recommended oil intervals.
Outstanding friction durability: Fluidmatic DCT MV demonstrated an outstanding improvement in friction durability, meaning it continues to provide the required friction response over time allowing drain intervals to be extended.
Excellent seal compatibility: Fluidmatic DCT MV technology performed ideally by meeting the most severe requirements of the seals testing.
Superior anti-shudder durability: Fluidmatic DCT MV demonstrated an outstanding improvement in friction durability, meaning it continues to provide the required friction response over time allowing drain intervals to be extended.
Excellent protection: Fluidmatic DCT MV shows superior protection against wear and tear also under
high stress working conditions.
C H A R A C T E R I S T I C S *
TESTUNITTEST METHODRESULT
Density at 15°Ckg/m3ISO 3675854
Kinematic viscosity at 40°Cmm²/sISO 310436.78
Kinematic viscosity at 100°Cmm²/sISO 31047.316
Viscosity index-ISO 2909176
Pour point°CISO 3016-48
Flash Point°CISO 2592204
R E C O M M E N D A T I O N S F O R U S E
Before using the product, the vehicle's maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer's recommendations.
The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent
the product's label from rubbing off.
H E A LT H , S A F E T Y A N D T H E E N V I R O N M E N T
Based on the toxicological information available, this product should not cause any adverse health effects, provided it is used for its intended purpose and in accordance with the recommendations laid out in the Safety Data Sheet (SDS).
This can be obtained on request from your local reseller and is available for consultation at https://ms-sds.totalenergies.com.
This product should not be used for any purposes other than the ones for which it is intended.
TotalEnergies Lubrifiants / Last update of this datasheet: September 24 / 9/17/2024
Some variations can be expected under normal production conditions, but these should not affect the product’s expected performance irrespective of
the site. The information contained in this document is subject to change without notice. Our products can be viewed on our website at www.lubricants.totalenergies.com.